GYTY53-4 Optical fiber Cable GYTY53-4 manufacturer from China NINGBO NEXTEK ELECTRONICS CO., LTD

Payment Terms:	T/T
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: GYTY53-4

Mode field diameter (1310nm): 9.2mm±0.4mm

Mode field diameter (1550nm): 10.4mm±0.8mm

Cut off wavelength of cabled fiber (lcc): 1260nm

Attenuation at 1550nm: 0.21dB/km

Dispersion in the range 1288 to 1339nm: 3.5ps/(nm•km)

Means of Transport: Ocean,Land

Cladding diameter: 125mm±1.0mm

Coating diameter: 245mm±7mm

Attenuation at 1310nm: 0.35dB/km

Bending loss at 1550nm (100 turns, 30mm radius): 0.05dB

Dispersion at 1550nm: 18ps/(nm•km)

Cladding diameter: 125mm±1.0mm

1. Cable cross-section

2. Cable Specification

2.1 Introduction

The fibers are placed in a loose tube made of PBT. The tubes are filled with a water-resistant filling compound. A steel wire sometimes sheathed with PE for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. The cable core is filled with the filling compound to protect it from water ingress, over which a thin PE inner sheath is applied. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE outer sheath.

2.2 Fiber color code

Fiber color in each tube starts from No. 1 Blue.

1	2	3	4	5	6	7	8	9	10	11	12
Blue	Orange	Green	Brown	_	_	_	_	_	_	_	_

2.3 Color codes for loose tube & filler rod

Tube color in each layer starts from No. 1 Blue. If there are fillers, the color is nature.

1	2	3	4	5	6	7	8	9	10	11	12
Blue	_	_	_	_	_	_	_	_	_	_	_

2.4 Cable structure and parameter

SN	Item	Unit	Value
1	No. of fibers	count	4
2	No. of fibers per tube(max)	count	4
3	No. of elements	count	1
4	Tube diameter	mm	1.7
5	Outer sheath wall thickness	mm	1.8
6	Cable diameter	mm	11.2
7	Cable weight	kg/km	140
8	Short term tension	N	3000
9	Short term crush	N/100mm	3000

Note: Mechanical sizes are nominal values.

3. Characteristic of Optical Cable

Mechanicalcharacteristic and test method
Tensilestrength	conform to IEC 794-1-E1
Crush	conform to IEC 794-1-E3
Impact	conform to IEC 794-1-E4
Repeatedbending	conform to IEC 794-1-E6
Torsion	conform to IEC 794-1-E7
Flexing	conform to IEC 794-1-E8
Cablebend	conform to IEC 794-1-E11
Waterpenetration	conform to IEC 794-1-F5B
Temperaturerequirement	Operation		- 40℃ ~ +60℃
	Installation		- 10℃ ~ +60℃
	Storage/transportation		- 40℃ ~ +60℃
Temperaturecycling test	conform to IEC 794-1-F1
BendingRadius	unloaded	10times of outer diameter
	loaded	20times of outer diameter

4. Characteristic of Optical Fiber

G652D fiber information

Mode field diameter (1310nm):	9.2mm±0.4mm
Mode fielddiameter (1550nm):	10.4mm±0.8mm
Claddingdiameter:	125mm±1.0mm
Coatingdiameter:	245mm±7mm
Cut offwavelength of cabled fiber (l_cc):	£1260nm
Attenuationat 1310nm:	£0.35dB/km
Attenuationat 1550nm:	£0.21dB/km
Bending loss at 1550nm (100 turns, 30mm radius):	£0.05dB
Dispersion inthe range 1288 to 1339nm:	£3.5ps/(nm•km)
Dispersion at1550nm:	£18ps/(nm•km)
Dispersionslope at zero dispersion wavelength:	£0.092ps/(nm²•km)