GYTA53-8 Optical fiber Cable GYTA53-8 manufacturer from China NINGBO NEXTEK ELECTRONICS CO., LTD

Payment Terms:	T/T
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: GYTA53-8

Mode field diameter (1310nm): 9.2mm±0.4mm

Cladding diameter: 125mm±1.0mm

Cut off wavelength of cabled fiber (lcc): 1260nm

Attenuation at 1550nm: 0.21dB/km

Dispersion in the range 1288 to 1339nm: 3.5ps/(nm•km)

Means of Transport: Ocean,Land

Mode field diameter (1550nm): 10.4mm±0.8mm

Coating diameter: 245mm±7mm

Attenuation at 1310nm: 0.35dB/km

Bending loss at 1550nm (100 turns, 30mm radius): 0.05dB

Dispersion at 1550nm: 18ps/(nm•km)

A steel wire sometimes sheathed with PE for cable with high fiber count, locates in the center of core as a metallic strength member.

1. Cable cross-section

2. Cable Specification

2.1 Introduction

The fibers are placed in a loose tube made of PBT. The tubes are filled with a water-resistant filling compound. A steel wire sometimes sheathed with PE for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. An Aluminum Polyethylene Laminate is applied around the cable core, which is filled with the filling compound to protect it from water ingress. Then the cable core is covered with a thin PE inner sheath. After the PSP is longitudinally applied over the inner sheath, the cable is completed with a PE out sheath.

2.2 Fiber color code

Fiber color in each tube starts from No. 1 Blue.

1	2	3	4	5	6	7	8	9	10	11	12
Blue	Orange	Green	Brown	_	_	_	_	_	_	_	_

2.3 Color codes for loose tube & filler rod

Tube color in each layer starts from No. 1 Blue. If there are fillers, the color is nature.

1	2	3	4	5	6	7	8	9	10	11	12
Blue	Orange	_	_	_	_	_	_	_	_	_	_

2.4 Cable structure and parameter

SN	Item	Unit	Value
1	No. of fibers	count	8
2	No. of fibers per tube(max)	count	4
3	No. of elements	count	2
4	Tube diameter	mm	1.7
5	Outer sheath wall thickness	mm	1.8
6	Cable diameter	mm	12.4
7	Cable weight	kg/km	210
8	Short term tension	N	3000
9	Short term crush	N/100mm	3000

Note: Mechanical sizes are nominal values.

3. Characteristic of Optical Cable

Mechanicalcharacteristic and test method
Tensilestrength	conform to IEC 794-1-E1
Crush	conform to IEC 794-1-E3
Impact	conform to IEC 794-1-E4
Repeatedbending	conform to IEC 794-1-E6
Torsion	conform to IEC 794-1-E7
Flexing	conform to IEC 794-1-E8
Cablebend	conform to IEC 794-1-E11
Waterpenetration	conform to IEC 794-1-F5B
Temperaturerequirement	Operation		- 40℃ ~ +60℃
	Installation		- 10℃ ~ +60℃
	Storage/transportation		- 40℃ ~ +60℃
Temperaturecycling test	conform to IEC 794-1-F1
BendingRadius	unloaded	10times of outer diameter
	loaded	20times of outer diameter

4. Characteristic of Optical Fiber

G652D fiber information

Mode field diameter (1310nm):	9.2mm±0.4mm
Mode fielddiameter (1550nm):	10.4mm±0.8mm
Claddingdiameter:	125mm±1.0mm
Coatingdiameter:	245mm±7mm
Cut offwavelength of cabled fiber (l_cc):	£1260nm
Attenuationat 1310nm:	£0.35dB/km
Attenuationat 1550nm:	£0.21dB/km
Bending loss at 1550nm (100 turns, 30mm radius):	£0.05dB
Dispersion inthe range 1288 to 1339nm:	£3.5ps/(nm•km)
Dispersion at1550nm:	£18ps/(nm•km)
Dispersionslope at zero dispersion wavelength:	£0.092ps/(nm²•km)